Details
Walker Tape®’s 99% Alcohol is an essential tool for proper scalp prep and cleanliness. It effectively removes oil, dirt, and residue from both the skin and your workstation surfaces, ensuring a clean foundation for a long-lasting and secure bond.

Directions
We recommend performing a patch test before use.

1. Saturate a Sponge Brush with 99% Alcohol.
2. Apply a thin layer evenly across your client’s scalp, or the area you wish to sanitize. Wait a few seconds for the alcohol to evaporate.
3. If you are installing a hair system, apply 99% Alcohol first, followed by a scalp protector, and then your tape or adhesive. 
   

Cautions
Flammable - do not store near or use near heat, sparks, or open flame. Use in a well-ventilated area. Close lid tightly. Do not apply to broken, cut, or irritated skin. External use only, do not ingest. Avoid eye contact. Keep out of reach of children. Test on a small area before use.

Store in a well-ventilated, cool, dark, dry, room-temperature controlled environment (60-80°F). SDS sheet is available below.

Width:Place the tape measure at one side of the head, the beginning point should be 1" distance from the temple point, then go up across the top to the opposite side (also 1" back from the temple point).
Length:Place the tape measure at the centre of the front hairline, and measure directly across the middle of the head.